UAZ HUNTER 315148, Руководство по эксплуатации

Страница: 3 / 136

3
Chapter 1. GenerAl InforMATIon
The UAZ-315195 and UAZ-315148 motor vehicles (Fig. 1.1)
are light two-axle all-terrain vehicles, with 4WD and a hardtop.
The motor vehicles are designed to transport passengers and
cargo over all types of roads and terrain.
The motor vehicles, manufactured in version "U" per Category
1 of State Standard (GOST) 15150, are designed for operation
under ambient operating temperatures of -40 up to +40°C,
relative humidity of up to 75 % at +15°C, air dust content of
up to 1.0 g/m
3
and wind speed of up to 20 m/s including in the
regions located at absolute elevations of up to 3,000 m, with
corresponding reduction of propulsion dynamic performance
and fuel efficiency.
The motor vehicles, manufactured in version "T", are designed
for operation under ambient operating temperatures of -10 up
to +50°C, air relative humidity of up to 80 % at 27°C under
conditions specified above for the "U"-version motor vehicles.
The "plus" sign near the part (assembly) description means
that this part (assembly) shall be installed into the motor vehicles
depending on the configuration.
MOTOR VEHICLE MARKINGS
The vehicle identification number (Fig. 1.2) is embossed on
the name plate and on the horizontal flange of the upper panel
of the front bodywork (under the motor hood, on the right side).
The motor vehicle name plate
(see Fig. 1.2) is located on the
center post of the aperture panel on the motor vehicle's right
side (in the rear side door opening).
The body number (see Fig. 1.2) is embossed on the horizontal
flange of the upper panel of the front bodywork (under the motor
hood, on the left).
T
he chassis number (see Fig. 1.2) is embossed on the right
side frame (in the rear part of the vehicle).
The engine identification number (Fig. 1.3) is located on the
engine's cylinder block on the left side.