UAZ HUNTER 315148, Руководство по эксплуатации

Страница: 44 / 136

44
Pass a fording point carefully, without a wake in front of the
motor vehicle, in the first or second gear of the gearbox with the
front axle and speed reduction gear in the transfer case engaged.
Avoid maneuvering and sharp turns.
After fording, as soon as possible, but not later than on the
same day, check oil condition in all the units. If you detect water
in the oil, replace the oil in the unit. Water presence in the oil
shall be detected by a change in the oil color. Lubricate all grease
nozzles of the chassis until fresh lubrication appears. Each time
the motor vehicle leaves a fording point, several times, partly
disengage the clutch and partly apply the brakes in order to dry
out the clutch facings and the brake shoe linings.
If the motor vehicle engine stops while fording, try two-three
times to restart the engine using the starter. If the engine fails
to start, the motor vehicle must be immediately removed from
the water by any possible means. If some water penetrated into
the motor vehicle units, it is not recommended to drive the
vehicle after the motor vehicle is removed from the water. Tow
the motor vehicle to a place where technical maintenance is
feasible.
The vehicle can move along virgin snow down up to 350
mm high. Make turns in the manner same as for moving on
marshland. When driving along grainy snow, apply the driving
rules that are stipulated for driving along a sand surface.