19
④
Function Introduction
Note
The source port (port#1) will not execute any formatting, because this function will delete
the data of the flash media.
6.1.2 FAT Format
Format any flash media to be FAT16.
6.1.3 FAT32 Format
Format any flash media to be FAT32.
6.2 Measure Speed
This function can measure the "read" and "write" speed of Flash media.
1
Plug the Flash media into slot and select function "6.2 Measure Speed", then
press
"
OK" button to start.
2
Use
▲▼
buttons to see Flash media exact "Read" and "Write" speed from each
port.
Note
•
This function may change the content of data and format of flash.
•
To protect source data, the system will not do "Measure Speed" on the master
device.
6.3 Media Check
This function is to analyze flash's quality. There are two kinds of methods to do media
checks, "H3 Safe" and "H5 R/W". Before executing quality check, user can go to
function "6.3.3 Setup Range" "6.3.4 Set Error Limit" to finish setting.
