④
Function Introduction
20
6.3.1 H3 Safe 100%
This function is to check the flash's quality by reading the flash media. After executing
the function, it will show the volume of bad sectors and also the reading speed of the
flash device.
good sector Test capacity
Reading speed
Note
This function will not delete the content or format.
6.3.2 H5 R/W 100%
This function is to check the flash's quality by reading and writing the flash media. After
executing the function, it will show the volume of bad sectors and also the reading/
writing speed of the flash device.
Bad sector Test capacity
Writing speed Reading speed
good sector Task
bad sectors number in processing
Note
❶
This function will delete the content and format of flash media, please do not
execute this function if there is important data in it.
❷
To protect the source data, the system will not execute this function on the master
device.