background image

BASIC OPERATION

THIS SIDE OF THE QUICK START GUIDE HAS BASIC
INSTRUCTIONS FOR DUPLICATING DVDs FROM THE
REFLEXULTRA’S 120 GB INTERNAL HARD DRIVE. THE
OPPOSITE SIDE HAS BASIC INSTRUCTIONS FOR
DUPLICATING 

DISC-TO-DISC

, WHICH IS COPYING

DVD-Rs OR DVD+R

S

FROM A MASTER DVD PLACED IN

THE UNIT’S TOP DRIVE. FOR MORE DETAILED
INSTRUCTIONS ON THE REFLEXULTRA’S DUPLICATING
OPERATIONS, PLEASE REFER TO THE 

USER’S GUIDE

ON THE ATTACHED CD. THE REFLEXULTRA DVD±R
WILL ALSO DUPLICATE CD-R

S

BY FOLLOWING THESE

SAME INSTRUCTIONS.

DUPLICATING DVD

S

USING THE

INTERNAL HARD DRIVE

The ReflexUltra duplicates in two different modes –

Hard Drive-to-Disc

mode, and 

Disc-To-Disc 

mode.

The 

Hard Drive-to-Disc

mode copies the DVD 

master to the unit’s hard drive, and then duplicates
the data to each blank DVD-R or DVD+R placed in
the writer drives. This ensures an exact copy of the
original master to every disc. The 

Hard Drive-to-

Disc

mode is very efficient for duplicating large 

numbers of discs.

1

Power on the ReflexUltra by pressing the round

button at the bottom right on the front of the unit.

The system will initialize and perform a self-test,
which will be displayed on the LCD display area. 

To set the Reflex to duplicate from the 

Hard-

Drive-to-Disc

mode, press the 

DOWN

arrow until

8. Select Source

is displayed in the LCD screen.

Press the 

ENT

button, and then press the 

DOWN

arrow until 

SRC: HDD IDEØ Master

is displayed

on the screen. Press the 

ENT

button, and 

HDD

Selected

will be displayed on the screen. Then

press the 

ENT

button again.

To copy your DVD master to the hard drive, you

must use the 

Image

function. To access the 

Image

function, press the 

DOWN

arrow until the LCD

screen displays 

9. Image

. Press the 

ENT

button

and the following should appear on the LCD
screen:

4

Place your DVD master in the top drive and

press the 

ENT

button. The master disc will begin

to be copied to the hard drive and the LCD screen
will read 

Image Load OK

. The letters 

P: A

that are

displayed on the screen indicate that your master
image has been successfully loaded into the 

“A”

partition of the hard drive. (The internal hard drive
of your ReflexUltra is broken into smaller parts
called “partitions.” Each partition can hold one

DVD image.) Remove your master.

Press the 

ESC

button two times until 

9. Image

appears in the LCD display. Then use the 

UP

arrow

to return to 

1. Copy

.

6

You are now ready to duplicate. Load the drives

with 

Disc Makers Ultra DVD-Rs or DVD+Rs

.

Close the drives and press the 

ENT

button. The

duplication process will begin. (If you wish to dupli-
cate fewer than your unit’s full capacity, load the
number of 

Ultra discs 

you need into the drives

and press the 

ENT

button to start the duplication

process.) When the duplication process is complet-
ed, the ReflexUltra will eject the successfully
copied discs. When the duplication is complete,
the LCD will display:

Next to 

OK:

will be the number of successfully

copied discs. In the screen example above, 4
copies were successfully duplicated.

Note:

When the duplication process is complete, the writer drives will

automatically eject the discs that have been duplicated successfully. The
LCD screen will display the number of copies that have 

PASSED

. If any

discs have not been duplicated successfully, the LCD screen will display
the number of copies that have 

FAILED

. The discs that have not dupli-

cated successfully will remain in their drives until the eject button on each
drive is pressed. For information on why a DVD-R or DVD+R might not
copy successfully, please see the 

User’s Guide

on the attached CD.

T

ReflexUltra

DVD±R Quick Start Guide

v1.1

9-01. Image

P: A

Load

1. Copy

P: A

OK: 04

Your ReflexUltra has been optimized to work with Disc Makers Ultra™ media. Our Ultra DVD-Rs and DVD+Rs will burn faster with less
rejects on the Reflex’s state-of-the-art Plextor drives. That means you won’t waste time or money on unsuccessful burns. 

PLEASE NOTE

THAT THE REFLEX ULTRA CAN ONLY DUPLICATE DISC MAKERS ULTRA media.

Other media cannot be duplicated in this system

and will be rejected. To order Disc Makers Ultra media, go to 

www.discmarket.com/ultra

, or call 

1-888-800-4041

.

T

www.discmakers.com 1-888-800-4041

Reviews:

Related manuals for ReflexUltra