15
④
Function Introduction
④
Function Introduction
1.
Copy
There are two kinds of copy modes, which are Asynchronous Copy and Synchronous
Copy. The system will check the content size of the source before executing "copy"
function. If the source content size is less than system's buffer memory, it will
automatically start asynchronous copying. If the source content size is larger than the
system's buffer memory, it will copy with synchronous mode.
1.1 Synchronous Copy
a) How to set "Synchronous Copy"?
1
Go to function "7.6 Asynchronous" to select "Disable".
2
If the source's content size is larger than system's buffer memory, it will execute
Synchronous Copy no matter which copy mode you set at function 7.6.
b) Operating Process
1
Plug in the source and target flash media. Select copy function and then press
"
OK" button .
Capacity of source
The number of target flash plugged in and ready to copy
2
When all flash cards are plugged in, press
"
OK" button to start copy. Or when all
slots are plugged, the system will automatically start copy.
Progressed time and percentage
Progressed size
Content size
