21
④
Function Introduction
6.3.3 Setup Range
The function is to set the % of the flash which you would like to check for its quality.
Using
▲▼
button to setup the flash examine area from 1% to 100%. 100% means to
check the whole Flash, it will take more time.
6.3.4 Setup Error Limit
This function is to set tolerance degree of error, by setting sector/KB/MB/GB, when
checking the flash. Using
▲▼
button to setup the error limit value.
Using
▲▼
button to set the parameter
6.4 Quick Erase
This function will erase flash's data content, it will not erase flash FAT16/32 format.
It can use
▲▼
button to check each Flash Card's erasing status, progress and
information.
Note
❶
Quick erase function can only erase the flash which is FAT 16/32 format.
❷
This function will damage the data in flash, please make sure you have backup all
important data before using this function.
6.5 Full Erase
It will completely erase the whole flash card, including format and content. Therefore
full erase will take more time. During the process, you can use "ESC" button to escape
the erase process, but the original format and content can't be read any more.
Note
This function will damage the data in flash, please make sure you have backup all
important data before using this function.
