background image

QUICK START GUIDE

u-line.com

31

USER GUIDE

u-line.com

Cleaning

Integrated Models

To clean integrated panels, use household cleaner per the 
cabinet manufacturer’s recommendations.

INTERIOR CLEANING

Disconnect power to the unit.
Clean the interior and all removed components using a mild 
nonabrasive detergent and warm solution applied with a 
soft sponge or non-abrasive cloth.

Rinse the interior using a soft sponge and clean water.

Do not use any solvent-based or abrasive 
cleaners.

 These types of cleaners may transfer taste  

and/or odor to the interior products and damage or discolor 
the interior.

NUGGET ICE MACHINE CLEANING CYCLE

This ice machine has an automatic clean alert function. 
The control will indicate 

CL

 in the display, approximately 

every six months with normal use, reminding you to 
clean your unit. When 

CL

 is displayed, ice production will 

continue. Depending on water conditions, more frequent 
cleaning may be necessary: see chart below. Cleaning 
removes lime scale, other mineral deposits, and sanitizes 
the machine. Poor ice quality and reduced ice output are 
signs that cleaning is necessary.

Clean surfaces with a mild detergent and warm water  
solution. Do not use solvent-based or abrasive cleaners. 
Use a soft sponge and rinse with clean water. Wipe with a 
soft, clean towel to prevent water spotting.

Clean any glass surfaces with a non-chlorine glass      
cleaner.

EXTERIOR CLEANING
Vinyl Clad (Black or White) Models

Stainless Models

Stainless door panels, handles and frames can discolor 
when exposed to chlorine gas, pool chemicals, saltwater or 
cleaners with bleach.

Keep your stainless unit looking new by cleaning with a 
good quality all-in-one stainless steel cleaner and polish 
monthly. For best results use Claire

®

 Stainless Steel 

Polish and Cleaner. Comparable products are acceptable. 
Frequent cleaning will remove surface contamination that 
could lead to rust. Some installations may require cleaning 
weekly.

Do not clean with steel wool pads.

Do not use stainless steel cleaners or polishes on 
any glass surfaces.

Clean any glass surfaces with a non-chlorine glass cleaner.

Do not use cleaners not specifically intended for 
stainless steel on stainless steel surfaces (this 
includes glass, tile, and counter cleaners).

If any surface discoloring or rusting appears, clean it 
quickly with Bon-Ami

®

 or Barkeepers Friend Cleanser

®

 and 

a nonabrasive cloth. Always clean with the grain. Always 
finish with Claire

®

 Stainless Steel Polish and Cleaner or 

comparable product to prevent further problems.

Using abrasive pads such as ScotchBrite™ will
cause the graining in the stainless steel to
become blurred.

Rust not cleaned up promptly can penetrate the
surface of the stainless steel and complete
removal of the rust may not be possible.

For information on Keg and Tap Towers, please reference 
the Single and Double Tap Tower Kits User Guide on     
u-line.com.

Cleaning

TDS (Total Dissolved Solids) 

Level mg/L (ppm)

Cleaning Interval

5 - 150

6 months

150 - 250

4 months

250 - 400

3 months (or sooner)

Hardness Level mg/L (ppm)

Cleaning Interval

0 - 66

6 months

67 - 133

4 months

134 - 200

3 months (or sooner)

USER GUIDE

u-line.com

Cleaning

Under normal conditions cleaning should be done 
when the display shows 

CL

. You may initiate 

a cleaning cycle at any time by pressing and 
holding the clean button for 10 seconds. 

0 1

 will 

appear in the display indicating the start of the 
cleaning process.

You may override 

CL

 in the display without cleaning by 

pressing and holding the up, down, & light button for 10 
seconds. 

ICE

 will scroll in the display and the cleaning 

reminder ( 

CL

) will be reset for another approximate six 

month cycle. Failure to clean may reduce the quality 
and quantity of ice produced. Once the clean cycle 
begins, it can be canceled by pressing      three times. 
Press      once more to start making ice. The clean cycle 
will automatically cancel if user fails to activate control at 
steps 2, 3b, and 5b within 2 hours.

Required for cleaning:

•    Hose and funnel - provided with unit
•    Bucket and cleaning sponge
•    Clean potable water
•    SafeCLEAN Plus™ Cleaner 

 

(Part No. ULANUGGETCLEAN) 1-8oz. bottle  

 

included with unit

•   1 Water filter (if required)

Need more cleaner? Visit u-line.com

CAUTION

!

Use only SafeCLEAN Plus™ Cleaner. Use of any 
other cleaner may damage the finish of the 
evaporator and will void the warranty.

Follow safety and handling instructions printed 
on the SafeCLEAN Plus™ bottle.

Notice:
Select models include a water filter. The filter 
must remain in place when using and cleaning 
the machine. The filter is designed to filter out 
scale, sediment, particles and cloudiness as 
well as reduce chlorine and other off tastes 
and odors. U-Line recommends replacing the 
filter (Part No. ULANUGGETFILTER) when you 
clean your machine. The filter is available at          
u-line.com.

1.  Press and Hold       for 10 seconds

a.  

0 1

 will appear in the display

b.  Remove access shield
c.  Remove all ice in bin
d.  Remove any ice protruding from the ice dispenser       
 

tube.

2.  Insert the end of the cleaning tube into the ice        

dispenser; slowly pour in approximately 1 quart of  
 hot (min. 100º F) potable water. This will melt ice 
inside the dispenser tube.  It is normal for some water 
to flow from the ice dispenser tube and exit from the 
vent tube while  pouring. Omit this step if no ice is in 
the   ice dispenser tube.

3.   Press and release

a.  

02

 will appear in the display

b.  Mix 4 ounces of SafeCLEAN Plus™ with 2 quarts of         
     potable water.

4.  Wait until 

03

 appears in the display

  a.  Using the funnel and cleaning tube, slowly pour              
   

3⁄4 of the cleaning solution into the dispenser  

  

 

tube. Air and some water will exit the vent tube.       

 

Remove cleaning tube. (Optional - for deeper   

 

cleaning, allow solution to soak for 60 minutes)

  b.   Press and release 

5

.  

04

 will appear in the display

a.  The machine will circulate the solution, cleaning   
 

and sanitizing the internal components, for                 

 

approximately 20 minutes.

b.  While the machine is circulating the cleaning   
   

 

solution, use 1⁄2 of the remaining cleaning solution      

    

      

and a sponge to wipe down the inside of the ice bin  

    

 

and scoop. Rinse with clean potable water.

Cl

Cleaning Tube

 and Funnel

Ice

Dispenser

Tube

Vent Tube

The unit will resume operation approximately 15 minutes 
after the automated cleaning process is completed. The 
water fill valve will energize, fill the water reservoir, and 
shut-off after three minutes. The compressor begins to 
operate and water flows over the evaporator assembly (ice 
mold). Initially, the water flow may not be uniform, causing 
uneven sized cubes or water to spill into the ice storage bin. 
This is a normal situation that will correct itself within the 
first 24 hours of operation.

NOTICE

Discard all ice produced in the first harvest.

Should power to the unit be interrupted during 
the self-clean cycle, it will be necessary to repeat 
the complete cleaning cycle after the power is 
restored.

REFRESH KIT

Due to variations in water quality or inadequate 
maintenance, your unit may become excessively coated in 
lime scale or calcium. U-Line offers a cost effective refresh 
kit which replaces man interior components and will return 
your unit to like-new condition. Refresh kits may be ordered 
from your local distributor and installed by your local 
service company. For information on your local distributor 
or service company please visit www.u-line.com.

When water begins flowing over the evaporator 
(approximately 3 minutes), pour 1 packet of CLR 
cleaner into the water trough. The cleaning process will 
last approximately 45 minutes.

Dilute 1 tablespoon bleach in 1 gallon of warm water. 
Apply this solution to the entire inside of the storage 
area. Then rinse thoroughly with water.

9.

10.

Содержание Outdoor Onb115



































Отзывы: