µ-Dimension D4006 Скачать руководство пользователя страница 39

Страница: 39 / 93

Configuration Guide

Leviton Dimensions 4000 Series Architectural Lighting Controller

Page 40

OPERATION

SETUP

QUICK START

ERVI

CONFIGURATION

•

5:30pm - Lights Blink, and any wall or master stations

controlling that room begin flashing it’s lights indicating

that the blink warn can be cancelled.

•

5:32pm - User presses any flashing button to enter

override. (If the user did not press a button, at 5:35pm the

off scene would be activated.)

•

5:32pm->6:30pm - Override mode active, scene 1 remains

active. Any change to lighting levels accepted during the

override time.

•

6:30pm - Lights Blink, and any wall or master stations

controlling that room begin flashing it’s lights indicating

that the blink warn can be cancelled.

•

User has the option of overriding the off event by pressing

any of the lights, in which case the cycle repeats.

•

6:35pm - If the event has not been overridden, the off

event will be activated.

Max Zones
This setting is used to set the maximum number of zones this

device will address. This setting is only available on D4200 &

D4206 devices. Valid values are 8, 16, 24, or 32 zones.
Factory Defaults
Allows reset of all settings to factory defaults. WARNING:

Selecting the factory defaults will irrecoverably erase all events

and other configuration you may have entered.

Personalities

You can set up various personalities that include different preset

Scenes. For example, a church could use one set of eight preset

Scenes for Sunday church service, and a different set of eight

preset Scenes for evening choir performances. By choosing

Personality 02, the second (choir performance) set of Scenes

could be recorded without disturbing the normal Sunday church

service settings.

The following information is unique to each personality:

•

Scenes (including fade rates)

•

Scene Labels

Содержание D4006






























































































Результаты поиска

Содержание D4006

Отзывы:

Похожие инструкции для D4006

Бренды по названию

Популярные бренды

µ-Dimension D4006, Руководство пользователя

Результаты поиска

Содержание D4006

Отзывы:

Похожие инструкции для D4006

Бренды по названию

Популярные бренды