manualshive.com logo in svg

typical GT856D, Инструкция

Поделиться
Скачать
typical GT856D Скачать руководство пользователя страница 23

 22

U-Disk is disabled. In the control box which doesn’t support U-Disk, the value is 
always 0 and can not be changed by user. 

To use patterns in a U-Disk, just plug the U-Disk to the USB device socket in the 

GT856D control box. After that, when you want to select a ROM pattern, you can 
only “see” the patterns in the U-Disk.The patterns stored in the machine can not be 
select at this state. After you un-plug the U-Disk, you can use the ROM pattern stored 
in the machine again. 

If you want to copy patterns from the U-Disk to the ROM storage of the machine, 

or if you want to copy the ROM pattern from the machine to U-Disk, you need enter 
the U-Disk operation state first.   

To do this, firstly, you insert the U-Disk to the control box when the power of 

control box is off. Secondly,you hold pressing the “ROM” key in the control panel 
and then turn on the power of the control box. After you hear the beep voice you can 
release the key press. The main display will show “U OP”, which means U-Disk 
operation. Now the machine enters the U-Disk operation state. 

In this state, there are only 3 function keys. 
“N1+” key: Copy user patterns from U-Disk to machine. 
“N2+” key: Delete user patterns in the machine. 
“N3+” key: Copy user patterns from machine to U-Disk. 
 
The patterns in the control box is divided into 2 groups:basic patterns and user 

patterns.The basic patterns’ code is from 000 to 299, while the user patterns’ code is 
from 300 to 999.The above U-Disk operation can only process user patterns. 

The copy operation will automatically search all the user pattern and copy it to 

the destination storage. If the destination storage contain the valid data of the same 
pattern number, the machine will give a warning “Er55” or “Er56”. On the moment, 
you can press “Set” key to allow the existing pattern be overwritten, or you can press 
“Half stitch move” key to skip the copy of this pattern. 

The copy operation may last for tens of seconds.After it is finished, the main 

display will show “U OP” again. 

You can press “N4+” key to quit U-Disk operation state and enter the normal 

work state. 

Содержание GT856D












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды