9
9
ROM pattern
Select ROM-stored pattern
10
Zigzag width
Set work zigzag width
11
Baseline position
Set baseline position
12
Left/Right Stop
Set left stop or right stop option of sewing
13
Start condensation
Set parameters for start condensation sewing
14
End condensation
Set parameters for end condensation sewing
15
Stitch-counted Sew
Set parameters for Stitch-counted sewing
16
Up Down Stop Switch
Switch between up needle position stop or down
needle position stop
17
Foot Switch
Enable or Disable Foot Lifter
18
Thread Trimmer Switch
Enable or Disable Thread Trimmer
19
Thread Wiper Switch
Enable or Disable Thread Wiper
20
Speed Control
Set Max. sew speed
21
Half Stitch Motion
Move needle bar by half cycle
22
Parameter
View and set system parameters
23 Set
Enter changed mode;Confirm and save all
changes
24 Main
Display
Show all information except feed pitch
information
25
Reverse Feed Pitch Display
Show reverse feed pitch value
26
Normal Feed Pitch Display
Show normal feed pitch value
27
Reverse feed switch
Switch display between positive reverse feed and
negative reverse feed.
28 In)/Decrease(-)
keys
Adjust value displayed nearby.
The follwing “+” “-” keys have secondary names.
2.2 Start up
The control box will auto start up when its power turns on. During the start
process, after you hear the “Bee Bee” warning tone and the main display show “UP”,
N1+
N1-
N2+
N2-
N4+
N3+
N3-
N4-
