manualshive.com logo in svg

typical GT856D, Инструкция

Поделиться
Скачать
typical GT856D Скачать руководство пользователя страница 17

 16

the main display will show the pattern width. 

4)

 

Press “Width” key, the main display will show the pattern width. 

5)

 

Press down the pedal to start sewing.If the indicator for start 
condensation is on, then the specified numbers of stitches for 
condensation is sewed first, then follwed is the normal sewing. 

6)

 

After finish the sewing, press the pedal backward to trim thread . 

 

■

 Note 

1)

 

To set feed pitch for A or D side: Press “Reverse feed switch” key to light 
up the indicator for A and D side, then the reverse feed display show the 
feed pitch for that side. Press corresponding “+”/” “-” key to adjust that 
value. 

2)

 

To set feed pitch for B or C side: Press “Reverse feed switch” key to light 
up the indicator for B and C side, then the reverse feed display show the 
feed pitch for that side. Press corresponding “+”/” “-” key to adjust that 
value. 

 

■

  Setting steps for condensation stitches and width 

1)

 

Press “Start condensation” key in the normal state, the indicator nearby 
the key will be lit up. The main display will show the number of 
condensation stitches in the “A” side. You can press the conrresponding 
“+”/ “-” key to change this value. The data range is 0~99 stitches. 

2)

 

Press “Start condensation” key for sencond time, the main display will 
show the number of condensation stitches in the “B” side. You can press 
the conrresponding “+”/ “-” key to change this value. The data range is 
0~99 stitches. 

3)

 

Press “Start condensation” key for third time, the main display will show 
the width of condensation stitches.Such as “U-**”.To change this value, 
press “Set” key, then the value start to blinks, you can press 
conrresponding “+”/ “-” key to change this value. The data range is 
0.0~8.0mm. 

4)

 

Press “Set” key to save all the changes made. 

5)

 

Press pedal to start sewing. 

 

■

 Note 

1)

 

The speed of start condensation: when the work speed is larger than 1200 
rpm, the start condensation is sewed by the speed of 1200 rpm.when the 
work speed is less than 1200 rpm, it is done as work speed. 

2)

 

The condition for start condensation to work is: all of the A,B,U value is 
larger than 0 and the indicator for start condensation is on. 

3)

 

The start condensation is done before any other sewing operations. 

4)

 

To disable start condensation, press “Start condensation” key for four 
times. When it is disabled, the indicator is off. 

 

Содержание GT856D












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды