20
number of stitches in horizontal side.Such as “F-**”. If you want to
change this value, press the corresponding “+”/ “-” key. The biggest
stitch number is 99.
3)
Press “Width” key, the main display show the work width.
4)
Press pedal forward to start sewing. After the number of stitches set by
vertical side in “E-**” is sewed, the sewing will stop automatically.
5)
Rotate the cloth by 90 degree. Then press pedal forward to start sewing
of horizontal side. After the number of stitches set by horizontal side in
“F-**” is sewed, the sewing will stop automatically.
6)
Rotate the cloth by 90 degree again. Repeat the step 4 an 5 by one time.
7)
After sewing stop, the machine will trim thread automatically.
8)
If the stitches of horizontal side is set to “F-00”, the sewing will be
finished after the first side is sewed and then the machine will trim thread
automatically.
■
Note
1)
Only set the number of stitches of vertical side (E-**) can work also.
2)
Press “Stitch-counted Sew” key by 3 times to cancel this function.
3)
The sewing speed can be controlled by control panel.
2.18 The Enable and Disable of the Presser Foot Lifter
When the foot switch indicator lights on, the pressor foot lifter is enabled. If not,
it is disabled. Press “Foot Switch” key to switch between the two state.
When enabled, the presser foot is controlled by pedal instruction.
2.19 The Enable and Disable of the Trimmer and Wiper
When the thread trimmer switch indicator lights on, the trimmer is enabled. If not,
it is disabled. Press “Thread Trimmer Switch” key to switch between the two state.
When the thread wiper switch indicator lights on, the wiper is enabled. If not, it is
disabled. Press “Thread Wiper Switch” key to switch between the two state.
If the thread trimmer is disabled, the thread wiper can not be enabled.
2.20 Half Stitch Motion
When the machine is at rest, press “
Half Stitch Motion
” key to start low speed half stitch
sewing.
The speed of the half stitch is setting by the system parameter P-02. The default value is 200
spm.
