Tylo H2, Руководство пользователя и инструкция по установке

Страница: 3 / 60

1
USER GUIDE
The control panel in general
The control panel is automatically activated when you pass your
hand over it.
Use
UP (see Figure 1, Page 1 pos 6) and DOWN (pos 9) to
scroll through the menus.
Use
UP and DOWN to increase/decrease a value when entering
data.
Confirm menu choices using
OK (pos 8).
1
2
3
4
5
6
7
8
9
10
11
12
13 14 15 16 17 18
OK
19
20
Figure 1: Main menu
1. ON/OFF
2. TEMPERATURE
3. HUMIDITY : Set humidity
4. TIMER : Program start time
5. SETTINGS
6. STATUS BAR
: Shows the status of certain functions
(13-20)
7. UP : One step up in the menu or increase value when enter-
ing data
8. LIGHT
9. OK : Confirm choice
10. DOWN : One step down in the menu or decrease value
when entering data
11. BACK : Go one step back in the menu or when entering
data
12. HOME : Return to main menu
13. ON/OFF STATUS : Shows that the sauna/steam bath is on
14. LIGHT STATUS : Shows that the light is on
15. TIMER STATUS : Shows that the control panel is pro-
grammed for delayed start
16. CALENDAR STATUS
: Shows that the system is calen-
dar-programmed
17. HUMIDITY STATUS : Shows approximate reservoir level
Full symbol = full reservoir, half-full symbol = half reservoir
and flashing empty symbol = empty reservoir. Only applies
to heaters with manual water filling.
18. LOCKED STATUS : Shows that the panel is locked
19. DRYING STATUS : Shows that the system is in Dryingset-
ting, replaces ON/OFF STATUS
20. STANDBY STATUS : Shows that the system is in Stand-
bysetting, replaces ON/OFF STATUS