Tyco 3G4000W, Руководство по установке

Страница: 5 / 28

Technical Specifications
The input voltage to the 3G4000W can be drawn from the UL/ULC Listed control panel or provided by an external UL/ULC Listed
power supply (with battery back-up) rated for the application (external power-limited source).
Power Supply (Sold Separately)
Input Voltage Class: Class 2, Power Limited
Compatible External Power Adapters (2-prong): ADP1310(W)-NA / ADP1310(W)-NAU
Power Adaptor Input 100-240V ~50/60Hz 0.4A
Power Adaptor Output 13.8V DC / 1 Ampere
Product Input Voltage and Current Draw
3G4000W Input Voltage / Input Current (Nominal) 13.8V
DC
/700mA (when supplied by compatible external power
adapter)
9-14V
DC
/500mA (use listed, compatible control panel or power
supply)
Average Current 40mA*
Peak Current (no battery) 180mA*
Peak Current (with battery) 350mA*
* Plus any current draw from the 3ve terminal if outputs are used
Battery (Sold Separately)
Battery Type NiMH, rated 7.2V, 2.2 AH
Battery Charging Voltage (maximum) 9.1 VDC
Battery Charging Current 160 mA
Battery Standby Time Greater than 24 hours
Note: The battery must be replaced every 3-5 years
Radio and Antenna
Supported Cellular Bands 2G Bands – GSM 850, GSM 900, DCS 1800, PCS 1900
3G Bands – FDD Band 1 (2100 MHz), Band 2 (1900PCS),
Band 5 (850MHz), Band 8 (900 GSM)
Cellular Antenna Gain
WCDMA B5, WCDMA B8, GMS 850, GSM 900 2.5 dBi
WCDMA B1 (Tx), WCDMA B2, DCS 1800, PCS 1900 6.2 dBi
WCDMA B1 (Rx) 2.8 dBi
Environmental Specifications
Operating Temperature 0°C - 49°C (32°F - 120°F)
Humidity 93%RH Maximum (non-condensing)
Mechanical Specifications
Dimensions, Plastic Enclosure (painted) .125 mm (W) x 220mm (H) x 31mm (D) / 4.9” x 8.7” x 1.2”
Weight (without battery) 400g / 1.2 oz
Simulated Telco Loop Specifications (TIP/RING)
On-Hook Voltage 12 VDC
Off-Hook Current 24 mA
Loop Resistance 600 Ohms
Loop Current 25 mA