409-10016
ELT Machine 1338600-[ ]
Rev H
13 of 34
Tyco Electronics Corporation
Figure 10
Guard
Open Icon
Green Indicator
Yellow
Indicator
Jog
Button
Speed Control
Knob
Fault Icon
Guard Disabled Icon
Machine Ready Icon
Speed Control Icon
Jog Button Icon
The green indicator on the top of the control panel indicates the machine status.
When the green indicator is on" and is not flashing, the machine is ready for operation.
When the green indicator is flashing, a machine fault has been detected. (To reset the machine,
power down" the machine, clear the problem area, and then power up" the machine. Or hold down
the foot pedal until the green indicator stops flashing.
The yellow indicator on the top of the control panel indicates the guard status.
(Note that this indicator is not active on Machine -4).
When the yellow indicator is on and is not flashing, the guard is open and the machine will not run.
When the yellow indicator is flashing, the guard is disabled and the machine will only operate with the Jog
button.
The Jog button icon indicates intermittent operation at a slower speed when using the
Jog button.
The Jog button allows the operator to cycle through various stages of the machine cycle.
The Speed Control Knob determines the machine speed (active in both normal operation and Jog operation)
Speed increases as the knob is turned CLOCKWISE.
Speed Ranges:
From 100% to 60% with the foot pedal
From 60% to 25% with the Jog button
Optional Batch
Counter
