background image

http://www.TYAN.com 

 

Transport GS12 

 

/

 

/  /   

B5103G12S2 

Revision 1.00 

 

 

 

 

 

Copyright ©   TYAN Computer Corporation, 2004. All rights reserved. No part of this 
manual may be reproduced or translated without prior written consent from TYAN 
Computer Corp

All registered and unregistered trademarks and company names contained in this 
manual are property of their respective owners including, but not limited to the 
following:

 

TYAN, Transport GS12 B5103G12S2 are trademarks of TYAN Computer Corporation. 
Intel, Xeon, and combinations thereof are trademarks of Intel Corporation. 
Phoenix BIOS are trademarks of Phoenix Technology. 
Microsoft, Windows are trademarks of Microsoft Corporation. 
IBM, PC, AT, PS/2 are trademarks of IBM Corporation. 
Promise is a trademark of Promise Technology. 
ATI, ATI RAGE is a trademark of ATI Technologies Incorporated. 
Winbond is a trademark of Winbond Electronics Corporation. 
Portable Document Format (PDF) is a trademark of Adobe Corporation. 

Information contained in this document is furnished by TYAN Computer Corporation 
and has been reviewed for accuracy and reliability prior to printing. TYAN assumes no 
liability whatsoever, and disclaims any express or implied warranty, relating to sale 
and/or use of TYAN products including liability or warranties relating to fitness for a 
particular purpose or merchantability. TYAN retains the right to make changes to 
product descriptions and/or specifications at any time, without notice. In no event will 
TYAN be held liable for any direct or indirect, incidental or consequential damage, loss 
of use, loss of data or other malady resulting from errors or inaccuracies of information 
contained in this document. 

 

Содержание B5103G12S2
























































































Отзывы: