Twite Instruments TD-196, Руководство по эксплуатации

Страница: 36 / 64

36
TWITE INSTRUMENTS THERMOSTAT MODEL TD-196 OPERATING MANUAL
SETTING FUNCTIONS CONT.
30. CHANNELS TO SCAN.
Selects channels to scan when in scan mode. If a channel is set to NOT CON-
NECTED it will not be scanned even if it set to scan.
PRESS “ SET ”
ENTER PASSWORD IF REQUIRED
s t TO SELECT NUMBER 30
PRESS “ ENT ”
1-8 PRESS s TO SELECT WHICH CHANNEL ON THE RIGHT HAND LEDS
PRESS t TO SELECT "YES" OR "no" FOR THAT CHANNEL
PRESS “ ENT ”
SELECTION COMPLETE.
31. SCAN TIME
Sets the time between channel scan from 1 to 50.
i.e.. 50 = 10 sec, 25 = 5, 1 = 1/4 sec approx.
PRESS “ SET ”
ENTER PASSWORD IF REQUIRED
PRESS
s t TO SELECT NUMBER 31
PRESS “ ENT ”
1 s t TO SELECT REQUIRED SCAN TIME FROM 1 - 50 INC. ON LED
PRESS “ ENT ”
SELECTION COMPLETE
32. SCAN YES OR NO
Sets whether the unit will scan or not (scans all required temperatures, high and low
alarms and set point used) if the display is displaying the relevant data.
PRESS “ SET ”
ENTER PASSWORD IF REQUIRED
PRESS
s t
TO SELECT NUMBER 32
PRESS “ ENT ”
1
s t
TO SELECT "YES" OR "no" ON LED
PRESS “ ENT ”
SELECTION COMPLETE