Twite Instruments TD-196, Руководство по эксплуатации

Страница: 15 / 64

15
TWITE INSTRUMENTS THERMOSTAT MODEL TD-196 OPERATING MANUAL
KEYBOARD FUNCTIONS CONT..
SELECTING CHANNELS (8 CHANNEL OPTIONAL EXTRA).
FUNCTIONS THAT REQUIRE CHANNEL SELECTION ARE INDIVIDUAL FOR
EACH CHANNEL PROVIDING THAT THE 8 CHANNEL OPTION IS PRESENT.
WHEN CHANNEL SELECTION IS REQUIRED THE FOLLOWING DISPLAY
WILL BE SHOWN AFTER THE FUNCTION (TO SET) HAS BEEN SELECTED
(PRESSING THE "ENT" KEY FOR THE FIRST TIME (AFTER THE PASS-
WORD HAS BEEN ENTERED IF REQUIRED).
To select a different channel than channel 1 press the s key, when the correct
channel is displayed (LED on that channel flashes) , press the t key. When the t
key is pressed the D/M/S (green LED) will turn on to indicate that it was selected
and off to indicate that it is not selected, To select more channels or to de select a
channel, repeat the above sequence until all required channels have been selected.
The last channel selected or de selected using the
t key will be the value shown on
the LED when the "ENT" key is pressed and will be the value used for the first
change even if other channels were different. If no channels were selected when the
"ENT" key is pressed, the unit will revert to its normal running display mode.
Press the "ENT" key when all channels required are selected.
After the "ENT" key is pressed, the number 1 LED (right hand LED bar) display
will show number 1 to indicate that it is set point one that will be altered. After
channel selection the
s and t keys are used to alter that value for the channel/
channels that was/were selected
If the "ENT" key is pressed without changing the value with the s or t KEYS
all values will remain the same even if some of the channels set points were different
than the last channel that was selected or de selected.