Twite Instruments TD-196, Руководство по эксплуатации

Страница: 35 / 64

35
TWITE INSTRUMENTS THERMOSTAT MODEL TD-196 OPERATING MANUAL
SETTING FUNCTIONS CONT.
28. LINE FEED YES OR NO.
Sets whether this unit is to send a line feed to the printer after it has sent its tempera-
ture data, if printing at preset times. This should be set to yes if this unit is the last
one in the system
(largest unit identity number) or is the one printing with the
smallest print interval. Each unit prints its data (print at preset times) at its own
position on a line therefore the unit that prints last on a line should send a line feed
to the printer, otherwise printing may be over printed in some cases. The unit that
sends the line feed also sends its time of day before it sends its temperature and line
feed.
NOTE :- If a unit is set to do a line feed and time it will send its time and
data, then send a page break and heading the first print time after it has been set to
do a line feed in this function. This allows the setting up of the printer and paper for
page breaks etc.
PRESS “ SET ”
ENTER PASSWORD IF REQUIRED
s t TO SELECT NUMBER 28
PRESS “ ENT ”
1 s t TO SELECT “YES” or “no”
PRESS “ ENT ”
SELECTION COMPLETE.
29. CHANNELS CONNECTED.
Selects the channels that are connected. If a channel is set to not connected, the unit
will not allow any function to operate on that channel.
PRESS “ SET ”
ENTER PASSWORD IF REQUIRED
s t
TO SELECT NUMBER 29
PRESS “ ENT ”
1-8 PRESS
s
TO SELECT WHICH CHANNEL ON THE RIGHT HAND LEDS
PRESS
t
TO SELECT "YES" OR "no" FOR THAT CHANNEL
PRESS “ ENT ”
SELECTION COMPLETE.