Twite Instruments TD-196, Руководство по эксплуатации

Страница: 29 / 64

29
TWITE INSTRUMENTS THERMOSTAT MODEL TD-196 OPERATING MANUAL
SETTING FUNCTIONS CONT.
20. CALIBRATE REAL TIME CLOCK.
Adjusts the Real Time Clock in steps between -30 and +30. 1 step each. 1 step =
5.34 seconds
(approx.) per month. To check clock, set to the correct time with the
calibrate set to 0 and check variation after 1 week. Adjust the calibrate value accord-
ingly.
PRESS “ SET ”
ENTER PASSWORD IF REQUIRED
s t
TO SELECT NUMBER 20
PRESS “ ENT ”
1
s t
TO SELECT REQUIRED No. FROM -30 TO +30 ON LED.
PRESS “ ENT ”
SELECTION COMPLETE.
21. PRINT.
Used for the following Print functions :- 1 = Print at preset times. 2 = Print Set point
parameters, 3 = data logged print and 4 = maximum and minimum.
If print at preset times is selected, it may be set to print every 15, 30, 60, 120
minutes or 1 to 4 times per day, or none
(no print at preset times)
PRESS “ SET ”
ENTER PASSWORD IF REQUIRED
s t
TO SELECT NUMBER 21
PRESS “ ENT ”
SELECT CHANNELS IF REQUIRED (OPTIONAL EXTRA)
1
s t
TO SELECT "PSt" "PSP" "dLo" "Pnn" (preset times, parameter set
points, data logged and maximum/minimum).
PRESS “ ENT ”
If parameter set points, data logged or maximum/minimum was selected the
data will be sent to the RS485 port. NOTE :- at least one channel must be
selected if selecting parameters to print but all channels will be printed if the 8
channel option is present.
The unit will send the above data if no other unit is currently printing after a
delay of its own unit identity number in 1/3rd. seconds or after the same delay
after the other units have stopped printing. The unit will return to its normal
running mode display after the above two if selected.
If print at preset times was selected continue to select when to print.