Twin Eagles TE1BQ36RS Скачать руководство пользователя

Страница: 13 / 38

7 | www.twineaglesgrills.com

GAS SAFETY REQUIREMENTS

Each appliance is set and tested at the factory for the type of gas supply to be used. Identify the type

of gas, either natural gas (NG) or Liquid Propane (LP) gas and make sure that the marking on the data plate

(rating plate) matches the gas being supplied to the grill. This information is found on the data nameplate,

located on the bottom right hand side of the firebox near the regulator. A second label with model number

and serial number is located under the right side of the control panel on the fire box. Remove the drip pan to

visually access the nameplate from the front of the grill.

All gas connections should be made by a qualified technician and in accordance with local codes and

ordinances. The installation must conform with local codes or, in the absence of local codes, with either the

National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1 or Pro

pane Storage and Handling Code, B149.2.

WARNING:

ENSURE THAT THE GAS SUPPLY HOSE DOES NOT COME IN CONTACT WITH ANY

HOT SURFACE OF THE GRILL.

NEVER CONNECT THE GRILL TO AN UNREGULATED GAS SUPPLY.

L.P. GAS SAFETY REQUIREMENT

The LP-gas supply cylinder must be constructed and marked in accordance with the

Specifications for

LP-gas Cylinders

of the U.S. Department of Transportation (D.O.T.) or the National Standards of Canada

CAN/

CSA-B339, Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods, and Commission

, as appli

cable; and

1. Provided with a listed overfilling prevention device.

2. Provided with a cylinder connection device compatible with the connection for outdoor cooking

appliances.

•

It must be provided with a shut-off valve terminating in gas tank valve outlet. It must include a collar to

protect the cylinder valve. The cylinder supply system must be arranged for vapor withdrawal.

•

Do not operate the gas grill indoors or in any enclosed area. If the gas grill is not in use, the gas must be

turned off at the supply cylinder. If the grill is to be stored indoors, disconnect the gas supply cylinder

and leave the cylinder outdoors out of reach of children and must not be stored in a building, garage or

any other enclosed area.

IMPORTANT NOTE:

Permanent plumbed LP connections, such as those with a bulk cylinder, require a regulator that is convertible

from LP to NG. (Part Number: S15303)

Содержание TE1BQ36RS







































Результаты поиска

Содержание TE1BQ36RS

Отзывы:

Похожие инструкции для TE1BQ36RS

Бренды по названию

Популярные бренды

Twin Eagles TE1BQ36RS, Инструкция по установке, использованию и уходу

Результаты поиска

Содержание TE1BQ36RS

Отзывы:

Похожие инструкции для TE1BQ36RS

Бренды по названию

Популярные бренды