Tweco ArcMaster 201 TS, Руководство по обслуживанию

Страница: 23 / 80

SAFETY AND INSTALLATION TWECO 201TS
Manual 0-5150 3-5 Safety and Installation
Welding Power Supply
Primary Power Cable
Art# A-10143
Table 3-2: Electrical Input Connections
Input Power
Each unit incorporates an INRUSH circuit. When the MAIN CIRCUIT SWITCH is turned on, the inrush circuit
provides pre-charging for the input capacitors. A relay in the Power Control Assembly (PCA) will turn on after the
input capacitors have charged to operating voltage (after approximately 5 seconds)
NOTE
Damage to the PCA could occur if 253 VAC or higher is applied to the Primary Power Cable.
Model Primary Supply Lead
Size (Factory Fitted)
Minimum Primary
Current Circuit Size
(Vin/Amps)
Current & Duty Cycle
LIFT TIG/ HF TIG
(GTAW)
STICK (SMAW)
Tweco 201 TS H07RN-F 2.5mm²
110V/39A - 125A @ 25%
110V/30A 160A @ 30%
-
230V/32A - 200A @ 25%
230V/21A 200A @ 25%
-
Table 3-2: Primary Circuit Sizes to Achieve Maximum Current