SAFETY AND INSTALLATION
TWECO 201TS
Manual 0-5150 3-3
Safety and Installation
Tweco continuously strives to produce the best product possible and therefore reserves the right to change, improve
or revise the specifications or design of this or any product without prior notice. Such updates or changes do not
entitle the buyer of equipment previously sold or shipped to the corresponding changes, updates, improvements
or replacement of such items.
The values specified in the table above are optimal values, your values may differ. Individual equipment may differ
from the above specifications due to in part, but not exclusively, to any one or more of the following; variations or
changes in manufactured components, installation location and conditions and local power grid supply conditions.
NOTE
Due to variations that can occur in manufactured products, claimed performance, voltages, ratings, all
capacities, measurements, dimensions and weights quoted are approximate only. Achievable capacities
and ratings in use and operation will depend upon correct installation, use, applications, maintenance
and service.
3.03 Environment
These units are designed for use in environments with increased hazard of electric shock. Examples of environments
with increased hazard of electric shock are:
A. In locations in which freedom of movement is restricted, so that the operator is forced to perform the work in
a cramped (kneeling, sitting or lying) position with physical contact with conductive parts.
B. In locations which are fully or partially limited by conductive elements, and in which there is a high risk of
unavoidable or accidental contact by the operator.
C. In wet or damp hot locations where humidity or perspiration considerably reduces the skin resistance of the
human body and the insulation properties of accessories.
Environments with increased hazard of electric shock do not include places where electrically conductive parts in
the near vicinity of the operator, which can cause increased hazard, have been insulated.
3.04 Location
Be sure to locate the welder according to the following guidelines:
• In areas, free from moisture and dust.
• Ambient temperature between 14°F (-10°C) to 104° F (40° C).
• In areas, free from oil, steam and corrosive gases.
• In areas, not subjected to abnormal vibration or shock.
• In areas, not exposed to direct sunlight or rain.
• Place at a distance of 12” (300mm) or more from walls or similar that could restrict natural air flow for
cooling
!
WARNING
Tweco advises that this equipment be electrically connected by a qualified electrician.
Содержание ArcMaster 201 TS
