twall Premium64, Руководство пользователя

Страница: 17 / 40

t wall
®
Premium64 standard Color mobile / stationary User manual | Rev. 1.0.3
E| 17
PLEASE NOTE: Please keep in mind that the correct polarity has to be considered as it is mechanically
coded. Please avoid any violence. Please make sure to handle the cables very carefully. Do not pull or twist
them, especially not close to the connectors. Furthermore, please use the correct cable slots of the stain-
less steels frame covers to avoid that any cables will be damaged.
Step
28
Screw the lateral stainless steel
frame covers
B1 and B2
and the upper /
lower stainless steel frame cover
B3
respec-
tively to the threaded bolts attached to the
basic modules using the eleven (11) fillister
head screws
M6x10
provided and the corre-
sponding Allen key
(fig. 3.1-37)
. Please
remove the protection film before you
assemble the frame cover.
Step
29
Putting into operation: Plug the
24V barrel connector of the provided adapter
C3
into the 24V jack of the
t
wall
®
. The jack
and the switch can be found at the right
stainless steel frame cover. Now connect the
adapter to the power supply line and plug it
into a 200V/ 10A socket and switch on the
t
wall
®
(fig. 3.1-38)
. All lights will flash up
for a short moment and the
t
wall
®
is ready to
operate.
fig. 3.1-37
fig. 3.1-38
Step
27
:
Now connect the power
supply for the basic modules. For connector
positions please see
fig. 3.1-36
. At first,
connect connector 1 (upper left basic module)
to connector 2 (upper right basic module
below the manifold PCB). Following, connect
connector 3 (upper right basic module above
the line filter) to the control panel in the
stainless steel frame cover
B2
.
Connector 1
Connector 3
Connector 2
right frame side
fig. 3.1-36
stainless steel frame
cover with control panel
double-pole power
supply cable
A
B
C
X2