twall Premium64, Руководство пользователя

Страница: 15 / 40

t wall
®
Premium64 standard Color mobile / stationary User manual | Rev. 1.0.3
E| 15
Step
19
Place the weights
A4
at the rear
side of the frame base
(fig. 3.1-28)
. Please be
aware of the industrial safety regulations (20
kg | 44 lbs per weight).
Step
20
Finally, put the two (2) black
cover caps on the top ends of the side
supports and press the four (4) grey PVC
combination profiles into the outward lead
channels of the side supports (above the cross
pieces of the profile connectors, 2 x at the
right side and 2 x at the left side).
3.1.3.3 Assembling the basic modules
If you have done all these steps, it must look
like in
fig. 3.1-29.
Now you can start with
setting up the basic modules.
I. Setting up the basic modules:
Step
21
Before you start mounting the
basic modules, please insert all eight (8) T-nuts
M8
required into the front lead channels of
the side supports.
Step
22
The basic modules
A3a
to
A3d
are marked bottom right (UR), bottom
left (UL), top right (OR) and top left (OL).
Insert the two lower basic modules into the
frame construction using the z-profiled plates
attached to the rear of each module
(fig.
3.1-30)
. The basic modules will be fixed with
two (2) provided socket head screws
M8x30
and two (2) washers for each module.
Step
23
Please go back to step 22 and
repeat the procedure with the upper basic
modules.
Abstände:
t
wall
® Premium64 mobil
Boden bis Mitte 1. T-Nutenstein 570 mm + 9,5 mm = 579 mm
Boden bis Mitte 2. T-Nutenstein 1230 mm + 9,5 mm = 1239 mm
Boden bis Mitte 3. T-Nutenstein 1480 mm + 9,5 mm = 1489 mm
Boden bis Mitte 4. T-Nutenstein 2170 mm + 9,5 mm = 2179 mm
fig. 3.1-30
A3b
A3d
A3a
A3c
fig. 3.1-29
PLEASE NOTE: Once having finished the assembly of the aluminium frame, please check whether all profile
connectors at the frame base and the aluminium frame are bolted together strongly (ca. 25Nm).
fig. 3.1-28