TWAC Protectant, Руководство по установке

Страница: 13 / 182

P a g e | 11
TWAC Installation Manual Ver: 0118 CodeMark™ CMA-CM40036
TECHNICAL & TRAINING MANUAL
This Technical and Training Manual is the property of The White Ant Co Pty Ltd and its contents are
specific to the installation of the products referred to within the manual. At no time may the contents of
the manual be given to others or discussed outside The White Ant Co Pty Ltd. Should your involvement
with The White Ant Co Pty Ltd cease, this manual must be returned to a company representative.
The Technical and Training Manual gives instruction on the basic installation techniques required for
the correct installation of The White Ant Co Pty Ltd’s range of products. Should an installer be unsure
of any installation they are required to contact a White Ant Co Pty Ltd supervisor, manager or the
Technical and Training Manager for assistance.
The White Ant Co Pty Ltd's range of products have been tested and appraised by ABSAC, CSIRO and
Department of Primary Industry and Fisheries (Qld) as a physical termite barrier system and should be
installed accordingly. The White Ant Co Pty Ltd's range of systems hold a CodeMark
™ Certificate of
Conformity under the JAS-ANZ Quality management system.
The CSIRO appraisals
– 224 and 321 – refer to the White Ant Co. System for the installation of
stainless steel, aluminium, PVC and the Protectant
™ Polymer Termite Barrier System products
respectively to be used in conjunction with the adhesives ADSOL ADHESIVE and ADULETH
TERMITICIDE. The adhesives may never be considered as a termite barrier without the use of one of
the appraised products.
While the use of the products has been heavily researched and the application techniques proven over
a number of years, ongoing research, development and testing may result in changes. Should a
change be made, an update to the manual will be provided. Any update is to be placed into the manual
and the redundant sections removed. Updates will be provided when necessary. It is the responsibility
of regional managers and trainers to ensure all installers are made aware of any alterations and ensure
the version and date of the manuals are current.
The products are designed to provide a continuous and complete physical termite barrier. Should it not
be possible to install a complete barrier due to the type of construction, you must note on the relevant
paper work any incomplete areas, to ensure the extensive warranty of The White Ant Co Pty Ltd is not
compromised.
While this manual provides the instructions required to install the products in a manner to ensure the
efficacy of the system, be aware that the presentation of the completed installation, yourself and your
vehicle are equally important. An installation that looks to be professionally installed by a well
presented and competent tradesperson will ensure faith in both the product and yourself.
While not recognised as a trade, who else on any site can provide a physical termite barrier that is
guaranteed to work? You are the company representative on any installation and it is up to you to
ensure that continuity of work is achieved for both yourself and The White Ant Co Pty Ltd.
PREREQUISITE FOR LICENCE APPROVAL
Before any work can be commenced for The White Ant Co Pty Ltd it is a requirement
that the Job Safety Analysis included in the manual be signed and returned to the
Technical Manager. Failure to accept the conditions of the Job Safety Analysis or failure
to comply with the conditions during the course of installation will result in instant
dismissal.