60
Network Camera User Manual
5.6.3
Block and Allow Lists
Go to Config
Security
Block and Allow Lists as shown below.
The setup steps are as follows:
Check the “Enable address filtering” check box.
Select “Block/Allow the following address”, IPv4/IPv6 and then enter IP address in the
address box and click the “Add” button.
5.6.4
Security Management
Go to Config
Security
Security Management as shown below.
In order to prevent against malicious password unlocking, “locking once illegal login”
function can be enabled here. If this function is enabled, login failure after trying six times
will make the login interface locked. The camera can be logged in again after a half hour or
after the camera reboots.
Trigger Email
: if enabled, e-mail will be sent when logging in/out or illegal login lock
occurs.
Logout time
: Set the logout time as needed. For example: 3600s, you will be automatically
logged out after 3600s and then you need to enter the username and password again to log in.
Password Security
