43
Network Camera User Manual
2.
Enable the face detection function.
Save Source Information: if checked, the whole picture will be saved to the SD card when
detecting a face.
Save Face Information: if checked, the captured face picture will be saved to the SD card
when detecting a face.
Note
: To save images to the local PC, please enable the local smart snapshot storage first
(Config
System
Local Config). To save images to the SD card, please install an SD card
first.
Trigger alarm condition
: all alarms or mask off can be selectable.
All alarms: Alarms will be triggered when the camera detects a face (with/without a mask).
Mask off: Alarms will be triggered when the detected person is not wearing a mask on the
face.
3.
Set alarm holding time and alarm trigger options. The alarm trigger setup steps are the
same as fire detection setup. Please refer to
4.
Set alarm detection area.
