TVT Digital TD-5422E1, Руководство пользователя

Страница: 18 / 78

11
Network Camera User Manual
4 Fire Detection & Temp Measurement
4.1 Fire Detection
Fire Detection: Alarms will be triggered when the camera detects the fire source.
Click Config
 Fire Detection to enter the following interface.
1. Click “Enable” and set the alarm holding time.
2. Set alarm trigger options.
Alarm Out: If selected, this would trigger an external relay output that is connected to the
camera when the fire source is detected.
Trigger Audio Alarm : If selected, the warning voice will be uttered when the fire source is
detected. (Please set the warning voice first. See Audio Alarm for details).
Trigger Light Alarm : If selected, the light of the camera will flash when the fire source is
detected. (Please set the light flashing time and frequency first. See Light Alarm for details).
Trigger Snap: If selected, the system will capture images when the fire source is detected
and save the images on an SD card.
Trigger SD Recording: If selected, video will be recorded on an SD card when the fire
source is detected.
Trigger Email : If “Trigger Email” and “Attach Picture” are checked (email address must be
set first in the Email configuration interface), the captured pictures and triggered event will be