TVT Digital TD-5422E1, Руководство пользователя

Страница: 37 / 78

30
Network Camera User Manual
2. Click “Enable” and set the alarm holding time.
3. Trigger alarm out. When the camera is disconnected, the system will trigger the alarm out.
5.3.3 Alarm In
To set sensor alarm (alarm in):
Go to Config
 Alarm  Alarm In interface as shown below.
1. Click “Enable” and set the alarm type, alarm holding time and sensor name.
2. Set alarm trigger options. The setup steps are the same as fire detection. Please refer to
Fire
Detection chapter for details.
3. Click “Save” button to save the settings.
4. Set the schedule of the sensor alarm. The setup steps of the schedule are the same as the
schedule recording setup. (See
Schedule Recording ).