16
Network Camera User Manual
5.1.3
Local Config
Go to Config
System
Local Config to set up the storage path of captured pictures and
recorded videos on the local PC. There is also an option to enable or disable the bitrate
display in the recorded files.
Additionally, “Local smart snapshot storage” can be enabled or disabled here. If enabled, the
captured pictures triggered by smart events (like line crossing detection, region intrusion, etc.)
will be saved to the local PC.
Rendering Mode: High-efficient mode, compatible mode or low-efficient mode can be
optional.
If the performance of your computer is not compatible with the web client or your computer
has no graphics card, low-efficient mode is suggested.
Note
: when you access your camera by the web browser without the plug-in, only Show
Bitrate can be set in the above interface.
5.1.4
Storage
Go to Config
System
Storage to go to the interface as shown below.
