Tuxedo PL6K, Инструкция по установке и эксплуатации

Страница: 21 / 36

21
STEP 11
(Operating Instructions)

SERIOUS DAMAGE
to the lift can occur if used
improperly.

NEVER
use the lift to raise just one end of the
vehicle only.

NEVER
stop a vehicle with the wheels on top of the
lift pads and attempt to raise the lift.

NEVER
remove all wheels off of a vehicle and lower
the lift to the ground
.
 Before raising a vehicle, check for leaks, and
possible binding of lift components. Make sure that
the hydraulic hose is clear of any possible pinch
points.
 If the lift is not operating properly, DO NOT use until
repairs or adjustments are made.
Loading the lift;
 Before loading or raising vehicle, be sure all
personnel are clear of the lift and surrounding area.
Pay careful attention to overhead clearances.
 Before raising, make sure the weight of the vehicle
does not exceed the rated capacity of the lift.
 Make sure lift is
in
fully lowered position.
 Drive vehicle over the lift making sure that the
center-line of the vehicle is positioned properly
over the lift pads.

Set parking brake or use wheel chock to hold
vehicle in position.
 Position any pads underneath the vehicle making
sure that they make secure contact with the frame
or other recommended lifting point.
To Raise Lift;
 Raise the lift by pressing the push button on the
power unit.
 Raise lift until the vehicles tires clear the floor.
 Stop and check to make sure the vehicle is secure
and the lifting pads are still in contact with the
frame.
 Continue raising until the vehicle is at the desired
height.
 Raise until the safety lock bars drop into position.
(See Fig. 11. 1)