Tuxedo PL6K, Инструкция по установке и эксплуатации

Страница: 9 / 36

9
INTRODUCTION
1. Carefully remove the crating and packing materials.
CAUTION!
Be careful when cutting steel banding
material as items may become loose and fall causing
personal harm or injury.
2. Check the voltage, phase and proper amperage
requirements for the motor shown on the motor plate.
Wiring should be performed by a certified electrician
only.
IMPORTANT SAFETY INSTRUCTIONS
Read these safety instructions entirely!
IMPORTANT NOTICE!
Do not attempt to install this lift if you have never been trained on basic automotive lift installation procedures.
Never attempt to lift components without proper lifting tools such as forklift or cranes. Stay clear of any moving
parts that can fall and cause injury.
1.
READ AND UNDERSTAND
all safety warning
procedures before operating lift.
2.
KEEP HANDS AND FEET CLEAR
. Remove hands
and feet from any moving parts. Keep feet clear of
lift when lowering. Avoid pinch points.
3.
KEEP WORK AREA CLEAN
. Cluttered work areas
invite injuries.
4. Consider work area environment. Do not expose
equipment to rain.
DO NOT
use in damp or wet
locations. Keep area well lighted.
5.
ONLY TRAINED OPERATORS
should operate this
lift. All non-trained personnel should be kept away
from work area. Never let non-trained personnel
come in contact with, or operate lift.
6.
USE LIFT CORRECTLY
. Use lift in the proper
manner. Never use lifting adapters other than what
is approved by the manufacturer.
7.
DO NOT
override self-closing lift controls.
8.
REMAIN CLEAR
of lift when raising or lowering
vehicle.
9.
CLEAR AREA
if vehicle is in danger of falling.
10.
ALWAYS INSURE
that the safeties are engaged
before any attempt is made to work on or near
vehicle.
11.
DRESS PROPERLY
. Non-skid steel-toe
footwear is recommended when operating lift.
12.
GUARD AGAINST ELECTRIC SHOCK
.
This lift must be grounded while in
use to protect the operator from
electric shock. Never connect the
green power cord wire to a live
terminal. This is for ground only.
13.
DANGER!
The power unit used on
this lift contains high voltage.
Disconnect power at the receptacle
before performing any electrical
repairs. Secure plug so that it cannot
be accidentally plugged in during
service.
14.
WARNING! RISK OF EXPLOSION
.
This equipment has internal arcing
or sparking parts which should not
be exposed to flammable vapors.
This machine should not be located
in a recessed area or below floor
level.
15.
MAINTAIN WITH CARE
. Keep lift clean for
better and safer performance. Follow manual for
proper lubrication and maintenance instructions.
Keep control handles and/or buttons dry, clean
and free from grease and oil.
16.
STAY ALERT
. Watch what you are doing. Use
common sense. Be aware.
17.
CHECK FOR DAMAGED PARTS
. Check for
alignment of moving parts, breakage of parts or any
condition that may affect its operation. Do not use lift if
any component is broken or damaged.
18.
NEVER
remove safety related components from the
lift. Do not use lift if safety related components are
damaged or missing.