Tuxedo FP8K-B, Инструкция по установке и эксплуатации

Страница: 15 / 32

15
FP8K-B / FP8K-DX / FP8K-DX-XLT
Jun 2017-A
CASTER KIT ASSEMBLY / INSTALLATION
1. Raise the Lift two to four feet high.
2. Assemble Caster assemblies as shown below.
3. Position each of the four Caster assemblies below the Crossbeam rails.
4. Install the four Pivot Pins (#106) and Hairpin Cotter Pins (#105) to secure Caster assembly to
each crossbeam.
5. Lower the Lift confirming that the Caster assemblies engage the columns and all four Columns
rise to clear the floor.
6. Now the lift can be moved.
CAUTION: DO NOT maneuver Lift with Casters, while vehicle is on Lift.
Read Safety & Operation Instructions before operating Lift.
(Also see Exploded View
Details on Page 27)