Tuttnauer TIVA8-L, Инструкция по эксплуатации

Страница: 5 / 56

5
Operative Instructions
2.1 Field of application
This machine, intended for washing and rinsing
glassware and laboratory utensils, is considered a class
IIb medical device (as defined in Directive 93/42/EEC
class IIb). With this machine, also called glasswasher,
it is possible to treat laboratory utensils, whose
manufacturers expressly state that they can be treated
in the machine (according to EN ISO 17664). Glassware
and laboratory utensils means instruments such as, for
example:
- containers: test tubes, beakers, bottles and ampoules;
- graduated containers: flasks, graduated cylinders;
- small glassware: lids, spatulas, magnetic laboratory
stirrers, stoppers;
- other glassware such as petri dishes, funnels, pieces
of tubing/cable, etc...
Follow the instructions of the glassware manufacturers.
The personnel in charge using the machine daily must
be aware of its main features, and must also receive
adequate and continuous training.
2.2 Label specifications
The glasswasher is equipped with an identification label
(for position see Fig. 2). The following table shows the
symbols used on the identification labels:
Symbol Description
Manufacturer of the device.
Date of manufacture of the device.
Device serial number from the
manufacturer.
Model name of the device.
Indicates the permitted temperatu-
re range (min./max.) of the water
supply.
Flow pressure on the water inlet
connected from min. to max.
The user manual includes important
safety information. Failure to comply
with these instructions can result in
injury and material damage. Please
read carefully the User Manual.
For indoor use only.
Keep away from sunlight.
Symbol Description
Keep dry.
Please read this user manual
carefully before commissioning the
device.
The product complies with UL safety
standards valid for both Canada and
the USA.
For the disposal of the machine
please refer to chapter "Equipment
Disposal".
2.3 Warranty
The manufacturer warrants the newly manufactured
product for 12 (twelve) months from the date of the
invoice of the Products unless specifically provided
otherwise in the Contract or Order Confirmation.
Within the aforementioned terms, the manufacturer
will supply free of charge any part which, at its sole
discretion, or of its authorized representative, shows
manufacturing defects, or at its discretion, carries out
repairs directly or through authorized personnel. In
any case, labor costs for replacing defective parts are
always charged to the Customer.
- The right of warranty services it is only recognized if,
once the defect is found, it is immediately reported
to the manufacturer, at the same time sending the
related repair request.
- Without prejudice to the Customer’s right of warranty
service in the above terms, it is expressly excluded
that the Customer may request termination of the
contract, replacement of the product or reduction of
the sale price, as well as compensation for any direct
or indirect damage. In no case the Warranty entitled
to equipment replacement.
- The manufacturer grants the warranty at its
discretion, according to the technical needs, to repair
or replacement of the defective parts.
- The replacement or repair of parts under warranty
will not extend the warranty terms.
- The expenses due to routine and special maintenance
interventions on the product are, in any case, the
purchaser’s responsibility.
- Transport costs, VAT and any custom duties are the
purchaser’s responsibility.