Page 21 of 57
5.1.2.
Keypad
The keypad consists of 3 keys as described below:
UP key
This key has the following functions:
In the menu directories:
o
This key enables the operator to browse
through the cycles.
In the directories available:
o
When the cursor is blinking on a number,
the
UP
▲
key increases its value.
o
When the cursor is blinking on a menu
selection, the
UP
▲
key allows browsing
backward through the menu.
o
When adjusting a parameter and the cursor
is blinking on “SET” or “EXIT” the
UP
▲
key activates that procedure.”
DOWN key
This key has the following functions:
In the menu directories:
o
This key enables the operator to browse
through the cycles.
In the directories available:
o
When the cursor is blinking on a number,
the
DOWN
▼
key decreases its value.
o
When the cursor is blinking on menu
selection, the
DOWN
▼
key allows
browsing forward through the menu.
o
When adjusting a parameter and the cursor
is blinking on “SET” or “EXIT” the
DOWN
▼
key activates that procedure.
START/STOP key
This key has the following functions:
In the main screen:
o
Starts the process when the required
program was chosen.
o
Stops the current process.
o
Cancels the ERROR message displayed on
the screen and opens the electric door lock.
In the menu directories:
o
When the cursor is blinking on a number,
the
START/STOP
key enables moving
to the next position.
o
When the cursor is blinking on a menu
selection, the
START/STOP
key
activates that selection.
5.1.3.
Printer
The printer prints the detailed history of each cycle performed
by the autoclave.
The printing is made on thermal paper with 24 characters per
line and contains the record information for subsequent
consideration.
