Page 4
1. Generals
1.1 Introduction
Models LABSCI 11LV ELV/ELVC/ELVPVBH are vertical sterilizers
designed especially for sterilization of instruments, liquids and other
materials in hospital laboratories, laboratories & research institutes,
food laboratories and pharmaceutical facilities.
The sterilizer is fully automatic with a choice of ten programs (including
two custom programs), eliminating any need for operator intervention
during a cycle. The custom programs are programs that may be
changed by an authorized technician. A computerized control unit
enables precise control and monitoring of physical parameters and
clear documentation of the sterilization cycles.
The autoclave is equipped with a safety valve, which blows off at 280
kPa (40 psi) (max. working pressure). The safety valve is located on
the rear of the autoclave. The control system provides adequate
protection, to ensure the safety of personnel and reliable operation with
a minimum of down time.
Printer is an optional addition to the autoclave. The printer prints the
preset and actual parameters of the cycle (temperature, time and
pressure/vacuum).
The autoclave is equipped with an analog pressure gauge designed for
reference only. In case that there is any problem with electricity supply
during a sterilization cycle the pressure gauge will be used to verify that
there is pressure in the chamber.
The temperature and pressure are controlled through sensors placed
inside and outside the media container or bottles.
This manual is intended to give the user a general understanding of
how the autoclave works and indicates best ways to operate and
maintain it in order to obtain optimum results and a trouble free
operation.
After reading this manual, operating the autoclave should be straight
forward. However, since the autoclave is built using high technology
sensitive components, no attempt should be made by the user or any
other unauthorized person to repair or re-calibrate it.
Содержание 2840 ELV-D
Страница 21: ...Page 20 3 15 Overall Dimensions Drawing mm...
Страница 74: ...Page 73...
Страница 80: ...Page 79 To avoid injuries use heat resistant gloves while unloading the autoclave...
Страница 84: ...Page 83 Attention Use protective gloves in order not to burn your hands with the hot steam Safety valve ring...