Page 32
Note:
To exit every screen, you can either:
move the cursor to Exit by pressing UP or DOWN keys and then
press START/STOP key,
- or -
press the UP and DOWN keys simultaneously.
On this screen you can either proceed to login (see 9.2) or choose one of the
quick options available without login.
Set Date and Time
This quick option enables the operator to set date and time.
1.
On the Quick Option screen, choose Set Date And Time. Time and
date are displayed.
2.
The time is displayed in the upper row in the form "HH:MM:SS". The
hour range is 24 hour (i.e. from "0" to "24")
3.
The date is displayed in the lower row in the form "DD: MMM: YYYY".
4.
To increase or decrease the time or the date use the UP or DOWN
keys.
5.
To move the cursor from one digit to another press the START/STOP
key.
6.
After changing the time and the date, by pressing the START/STOP
key move the cursor to Set.
7.
Confirm the new time and date by pressing UP or DOWN keys.
9.2. Entering the Main Menu
1.
When the autoclave is on and no cycle is running, enter the QUICK
OPTIONS screen by pressing the UP and DOWN keys simultaneously.
2.
On the Quick Options screen, choose login.
3.
Press the UP or DOWN keys to move the cursor to Admin.
4.
0000 is displayed on the screen with the cursor blinking on the right
digit.
5.
To increase or decrease the digits, press the UP or DOWN keys.
6.
After changing the code to 0001 move the cursor to Set by pressing the
START/STOP key.
7.
When Set is blinking, press the UP or DOWN keys to enter the MAIN
MENU of the autoclave.
8.
To browse through the directories, use the UP or DOWN keys.
9.
When the required directory is blinking, press the START/STOP key.
The required screen will be displayed.
9.3. System Parameters
Screen Saver
This subdirectory enables the operator to set the screen saver time.
The default time value is 90 minutes. It is possible to increase or decrease the
time value up to a maximum of 600 minutes or down to a minimum 0 minutes.
1.
On the Main Menu, choose System Parameters\ Screen Saver.
2.
When entering the Screen Saver screen, the time will be displayed.
The cursor is blinking on the "minute" digit.