Page 19
Setting paper
Printer model PLUS II
Front
view
1-Paper mouth
2-STATUS Led
3-OPEN key (for paper roll
compartment opening)
4-FEED key
5-Paper roll compartment
6-Paper end sensor
Fig. 1
1.
Open the printer's cover door (see Front view).
2.
Press the OPEN key to open the printer cover as shown (see Fig. 3/1).
Handle the paper cutter carefully not to cut your hand.
3.
Place the paper roll making sure it unrolls in the proper direction as
shown (see Fig. 3/2).
4.
The paper should roll off the top of the roll
5.
Hold the loose end of the paper with one hand and re-close the cover
with the other hand as shown (see Fig. 3/3) the printer cover is locked.
6.
Tear off the exceeding paper using the jagged edge (see Fig. 3/4).
Fig. 2
7.
Close the printer's cover door by pressing its corner with the tip end of
the paper emerging from the slot