TurMix CX 750, Руководство по эксплуатации

Страница: 64 / 72

67
DE
FR
IT
EN
Equipment that has reached the end of its service life can be handed over
at a sales outlet, and will be professionally disposed free of charge.
Equipment that has hazardous defects should be disposed of immediately,
so that it cannot be used again. Do not dispose of equipment with household
rubbish (for environmental reasons). 5.1 Disposal
5 Disposal
Switch the unit off and loosen the blocked ingredients, pressing them down
toward the cutting blade assembly with a rubber spatula. We also recommend
that you process a smaller quantity.
Switch the unit off and pour out the liquid. Check whether the cutting blade
assembly and gasket are correctly in place.
Odour occurs frequently when new machines are used for the first time.
You may also see some smoke. This will no longer occur after you have used
the unit several times. Odours and smoke can also occur if the unit is used
for too long. In this case, you have to switch off the unit and let it cool down
for at least 60 minutes.
No, only the blender jar without the cutting blade assembly and gasket.
If you turn the rotary dial to pulse (i.e. select the pulse function), the unit runs
at the highest speed as long as the rotary dial is kept in this position. This
pulse function gives you additional control over the processing steps.
No, wait until the ingredients have cooled to 80° C so that the blender jar
does not crack and is not damaged.
The unit stops suddenly because
the cutting blade assembly is
blocked. What can I do?
Liquid is escaping from the
blender jar. What can I do?
Why does the motor give
off an unpleasant odour during
processing?
Can I clean all removable parts in
the dishwasher?
What does «Pulse Function»
mean?
Can I pour boiling ingredients into
the blender jar?