3
85812
Specifications
Intended Use:
The WideSpin 1530 TM is intended to be used for the application of properly prepared
organic top dressing material. The WideSpin 1530 TM is NOT intended to be used for any purpose other than
the application of properly prepared organic top dressing material. Properly prepared top dressing is organic
material with a controlled moisture content that has been screened to remove debris, rocks, and excessive
sized top dressing material. Operation is intended to be at properly prepared worksites only. The WideSpin
1530 TM is intended only to be mounted to trucks having adequate weight, brakes, and horsepower to safely
control the top dresser. The proper Mounting Kit must be used to attach the WideSpin 1530 TM to the truck.
The WideSpin 1530 TM is intended to be used only when the operator is present at the drivers position on the
truck. The WideSpin 1530 TM is intended to be operated only when the truck and top dresser are moving. The
WideSpin 1530 TM is not intended to be operated unless it is properly attached to the truck. The WideSpin
1530 TM is NOT designed for or intended to accept riders.
Dimensions:
(Spinner Assembly Attached, Without Mounting Kit Installed)
Width ............................................................................1.29 Meter (50.75” Inches)
Height (Bottom of Spinner to Top of Hopper) ...............1.07 Meter (42.25” Inches)
Length ..........................................................................1.96 Meter (77.25” Inches)
Hopper Capacity
.................................... 0.54 Cubic Meter - 816.5 Kg. (19 Cubic Feet - 1,800 Pounds)
Minimum/Maximum Spread Width
....... 3.04 Meter to 9.14 Meter (10’ to 30’ Feet)
Operator Controls
.................................. Hand Held Spinner and Conveyor Belt ON/OFF Control,
Spinner Speed Control, Conveyor Belt Speed Control,
Adjustable Metering Gate, Spinner Assembly Tilt Control,
and Heavy Spread Diverter
Operating Ground Speed
...................... 8 Km/h (5 MPH)
Transport Speed
.................................... 8 Km/h (5 MPH)
Maximum Angle of Operation
.............. 15° Degrees
Electrical Requirements
....................... 12 Volt DC, Negative Ground, 15 AMP Fuse Protected
Electricity Supplied By Truck
Minimum Hydraulic Requirements
...... 26.5 Liters Per Minute at 10,342 kPa (7 GPM at 1,500 PSI)
Hydraulic Power and Fluid Supplied By Truck
Weight Empty
.........................................299 Kg (660 Pounds) without mounting kit installed
Weight Loaded
....................................... 1,115.5 Kg (2,460 Pounds) without mounting kit installed
Mounting Components Weight
............ 41 Kg (90 Pounds) - 85812 to a Cushman Textron
Turf-Truckster Brackets, Support, Hoses, Mounts and Dirt Shield
Noise Emission Level:
Operator Position
Sound Pressure (LpA) =
84.7 dBA
Sound Pressure Level (LwA) =
100.9 dBA
Registered Trademark and Patents
TURFCO
®
WIDE
SPIN
™ 1530 TM is covered by US Patent 6,149,079, 6,508,419 and 6,817,552.
TURFCO
®
, WIDE
SPIN
™ and Mete-R-Matic
®
are registered trademarks of Turfco Manufacturing, Inc.
HEAVYSPREAD™ and LIGHTSPREAD™ are trademarks of Turfco Manufacturing, Inc.
LpA 84.7 dBA
LwA 100.9 dBA
SPECIFICATIONS
Operating Conditions:
Truck Engine Full Throttle, Spinner
and Conveyor Belt Operating,
Hopper Empty, Unit Stationary
