TURFCO WIDESPIN 1530TM, Руководство пользователя

Страница: 5 / 56

5
85812
TRUCK REQUIREMENTS
Before operating the top dresser, assure that the truck
is properly equipped and designed to carry, operate,
and control the weight of a fully loaded 1530 TM top
dresser. The truck must have enough payload capacity
to handle 1,115.5 Kg (2,460 pounds) plus the weight
of the driver/operator. Truck must also have adequate
and functional brakes. Hydraulic and electrical
power supplied by the truck must meet the minimum
requirements. Refer to Specifications table on page 3
of this manual.
TO AVOID SERIOUS INJURY,
and Damage to the Truck and the WideSpin 1530
TM Top Dresser,
The Truck Must Be Rated for Proper Payload
Capacity, and Have Adequate Functional Brakes
and Provide Proper Hydraulic and Electrical
Power.
WIDE SPIN 1530 TM MOUNTING KIT
REQUIREMENTS
Never attempt to mount or install the WideSpin 1530
TM to any truck it was not designed to fit. The proper
mounting kit must be used to install the WideSpin 1530
TM to the truck. Never modify or alter any mounting
kit. Serious Injury and damage to the truck can result
form improper installation. Refer to the manual for the
mounting kit for more information.
Before operating the top dresser, assure that the
WideSpin 1530 TM is securely mounted to the truck.
Check the mounting brackets, the mounting bracket
hardware, and the mounting pins. Ensure that all
mounts and mounting hardware are tight and secure.
Refer to the manual for the mounting kit for more
information.
TO AVOID SERIOUS INJURY,
and Damage to the Truck and the WideSpin 1530
TM Top Dresser,
Do Not Attempt to Mount the WideSpin 1530 TM to
any Truck that it was Not Designed To Fit.
Never Modify or Alter Any Components of the
Mounting Kits.
THE TOP DRESSER AND THE TRUCK
The operator must read and understand the entire
manual for the truck used to carry the WideSpin 1530
TM top dresser. The operator must be trained in the
operation of the truck and knowledgeable in its safe
operation. The operator must be aware of the extra
weight placed on the truck when combined with the
top dresser. The extra weight will effect the handling,
balance, and braking performance of the truck.
TO AVOID SERIOUS INJURY,
Do Not Drive or Operate the Truck and Top
Dresser On Slopes Steeper Than 15º Degrees.
The operator must operate the truck in a safe
manner and know the operating limits of the truck
in relation to the weight, performance, center-of-
gravity, and operating characteristics of the top
dresser.
TO AVOID SERIOUS INJURY,
Read and Understand the Entire
Operator’s Manual Before Operating
The WideSpin 1530 TM and the Truck.
REMOVING WIDE SPIN 1530 TM FROM TRUCK
Always refer to the Installation Manual for the Mounting
Kit that was used to install the WideSpin 1530 TM top
dresser to the truck. Review the steps that were used
to install and connect the top dresser to the truck.
To Avoid Serious Injury,
Never Attempt To Lift the Top Dresser Manually.
Serious Bodily Injury Could Result From Lifting
The Top Dresser By Hand.
The Weight And Balance Of The Machine
Requires Approved Hoists And Lifting Devices.
The Top Dresser weighs 299 Kg (660 lbs) when
empty. Ensure that the hoist or lifting device, and
its rigging are rated to safely lift and suspend
the weight of the top dresser. The hopper of the
top dresser must be empty when the machine is
lifted.
Always use the lifting brace to pick up the top dresser.
The lifting brace was designed to protect the hopper
and is located to provide for even balance of the top
dresser when the spinner assembly is installed on the
rear of the top dresser.
Never attempt to install or remove a top dresser that
is filled with top dressing material. The hopper must
always be empty. Never attempt to pick up the top
dresser when top dressing is in the hopper.
Disconnect all electrical and hydraulic connections
to the truck before lifting the top dresser.
Refer to the
Operators Manual for the truck to properly reattach
any hydraulic or electrical connections to that part of
the truck.
Truck and Mounting Kit Requirements
WARNING
WARNING
WARNING
WARNING
WARNING
MOUNTING KIT REQUIREMENTS