31
85812
TO AVOID SERIOUS INJURY, Always Stop
the Engine Before Making Any Lightspread/
Heavyspread Adjustments to the Spinner Vanes.
Changing the vane mounting angle varies the width and
pattern of the overall spread and is necessary during
the changeover between Lightspread and Heavyspread
operations.
The mounting angle is adjusted by loosening the inside
locking screw on each vane (it is not necessary to loosen
the screw on the outside of the vane), sliding the vane
to the other end of the slot on the vane, and retightening
the screw.
NOTE: Because the right and left hand
spinner wheels rotate in opposite direction, the right and
left hand vanes are a mirror image of each other.
See
Figure 16 for the location and direction of adjustment for
each individual vane.
Adjusting Spinner Wheel Vanes
(See Figure 15 and 16)
WARNING
VANE
(SHOWN IN
LIGHTSPREAD
POSITION)
SLOT
MOUNTING
ANGLE
INSIDE LOCKING SCREW
FIGURE 15
SV85811-08
LIGHT
LEFT
RIGHT
HEAVY
RIGHT
LEFT
FIGURE 16
LIGHTSPREAD
VANE
ADJUSTMENT
(AS VIEWED FROM
TOP)
SET AT MAXIMUM
VANE MOUNTING
ANGLE
HEAVYSPREAD
VANE
ADJUSTMENT
(AS VIEWED FROM
TOP)
SET AT
MINIMUM VANE
MOUNTING ANGLE
SV85811-09
SERVICE LEVEL MAINTENANCE
