Turbosound TBV118L-AN, Руководство по монтажу

Страница: 8 / 50

8
TBV123 / TBV123-AN and TBV118L / TBV118L-AN Rigging Manual
2.2 Rigging and Acoustic Simulation Software
The EASE FOCUS II software allows you to configure the system for optimal performance and coverage
in the venue.
The software can be downloaded from http://www.afmg.eu/index.php/products.html
Further information about the TBV models is available from www.turbosound.com
The TBV123 is a constant curvature line array, and the inter-cabinet angle is fixed at 15 degrees.
The quantity of cabinets can be varied, and the SPL coverage calculated for any configuration.
Once an optimum system has been designed using the EASE FOCUS II software, the correct suspension hole on
the TBV123-FB flybar should be noted, where your bow shackle would be fitted for single-point suspension.
For two-point suspension, pick point holes #1 and #6 can be utilized in conjunction with front and rear chain
motors to obtain the desired array site angle.
The EASE FOCUS II screenshot below is for a typical TBV123 configuration. Check the
“
RIGGING
”
Tab and note
installation parameters such as: array weight, bottom element elevation above ground level,
bottom enclosure angle.
! !
WARNING
ERROR AND WARNING INDICATIONS ARE GIVEN IN THE OBJECT PROPERTIES WINDOW IF WORKING LOAD
LIMITS ARE EXCEEDED AT 10:1, 7:1 OR 5:1 DESIGN FACTORS. HEED THESE WARNINGS AT ALL TIMES IN
ACCORDANCE WITH LOCAL REGULATIONS.
EASE FOCUS II Typical Screenshot for a TBV123/TBV118 Mixed Array
Rigging Tab Shows the layout graphically,
and indicates the correct suspension pick
point to choose on the flybar.
15°
15°
15°
15°