Turbosound TBV118L-AN Скачать руководство пользователя страница 25

Страница: 25 / 50

Rigging Manual

Chapter 5: Assembling a Mixed Array on a TBV123-FB Flybar

5.0.1 Required Components

Item

Quantity

TBV123-FB Flybar

TBV118L Subwoofer

1 (maximum)

TBV123 Cabinet

2 (maximum)

5.0.2 Preparation

Use the EASE FOCUS II software application to design your system to suit the

venue. This will calculate which flybar mounting hole to attach your bow shackle.

5.0.3 Location

Move the TBV118L subwoofer cabinet so it is sitting upright on a safe flat surface,

directly below the suspension point.

5.0.4 Measured Weights

Please see Section 2.3 Weights on Page 9, and refer to EASE Focus Rigging

Parameters when designing your system.

TBV123-FB Flybar Working Load Limit (WLL)

Item

Working Load Limit (WLL)

TBV123-FB

100 kg

220.5 lbs

The following procedure shows how to build a mixed array of one TBV118L

subwoofer and 2 TBV123 cabinets.
The system is flown using a TBV123-FB flybar that attaches to your

lifting system.
The TBV118L subwoofer connects to the mounting points on the flybar. The top

TBV123 cabinet connects to the subwoofer above using the integral mounting

points and rigging pins. No tools are required.

WARNING

DO NOT EXCEED A TOTAL QUANTITY OF 1 TBV118L SUBWOOFER AND 2 TBV123

CABINETS FOR 1 TBV123-FB FLYBAR. FAILURE TO FOLLOW INSTRUCTIONS MAY

CAUSE PERMANENT INJURY OR DEATH.

WARNING

THIS ARRAY SHALL ONLY BE MADE WITH THE TBV118L SUBWOOFER ON TOP, AND

THE TBV123 CABINETS BELOW. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE

PERMANENT INJURY OR DEATH.

5.0.5 Personnel

The following procedures shall be undertaken by experienced, certified,

qualified, and authorised personnel only. The procedures require the use of three

or more authorised persons.

Protective Headwear shall be worn

Protective Footwear shall be worn

Protective Gloves shall be worn

Protective Eyewear shall be worn

Practice Safe Lifting

Содержание TBV118L-AN



















































Результаты поиска

Содержание TBV118L-AN

Отзывы:

Похожие инструкции для TBV118L-AN

Бренды по названию

Популярные бренды

Turbosound TBV118L-AN, Руководство по монтажу

Результаты поиска

Содержание TBV118L-AN

Отзывы:

Похожие инструкции для TBV118L-AN

Бренды по названию

Популярные бренды