Tunze SmartController 7000 Скачать руководство пользователя страница 24

Страница: 24 / 24

Thank you very much, that you have opted to purchase a high-quality product from TUNZE

Aquarientechnik GmbH. As the

manufacturer, we regard it as our obligation to deliver a flawless product to you which will provide you with many years of

enjoyment, in order to fulfill the trust you have placed in us. The passion for what we do is already applied during the design

stages and continued throughout the production, the quality control, and all the way up to the packaging. Should you still detect

any defects, we kindly ask you not to hesitate and directly contact your dealer or us.

Warranty

The unit manufactured by TUNZE

Aquarientechnik GmbH carries a limited guarantee for a period of twenty-four (24) months

after the date of purchase covering all defects in material and workmanship. Within the framework of the corresponding laws,

your remedies in case of a violation of the guarantee obligation shall be limited to returning the unit manufactured by TUNZE

Aquarientechnik GmbH for repair or replacement at the discretion of the manufacturer. Within the framework of the corresponding

laws, the said shall be the only remedies. Consequential damage and/or other damage shall be excluded therefrom explicitly.

Defect units shall have to be shipped to the dealer or the manufacturer in the original packaging together with the sales slip in a

pre-paid consignment. Unpaid consignments will not be accepted by the manufacturer.

Exclusion from guarantee shall exist also in case of damage caused by inexpert handling (such as water damage), technical

modification carried out by the buyer or by connection to devices which have not been recommended.

Subject to technical modifications, especially those which further safety and technical progress.

Customers in USA, please refer to seperate Limited Warranty for United States brochure.
The service life of the electrodes during continuous operation is approx. one to two years, whereas this time can usually be

extended with good care and occasional measurements. A storage time of the mV or pH electrode for several months before

first use only slightly shortens the service life, if the tip of the electrode remains in the protective cap with KCl solution and is kept

moist. Exact specifications are thereby not possible here, because the lifetime depends on the respective usage. All electrodes

have been tested and are ready for measurement. If used properly, the warranty of the electrode is twelve (12) months from the

date printed on the electrode packaging. TUNZE® Aquarientechnik GmbH shall not assume any guarantee for improper handling

(electrode breakage, drying out).

Disposal

(in keeping with RL2002/96/EU)

The device and the battery may not be disposed

of in normal domestic waste; it has to be disposed

of in an expert manner.

Important for Europe: Devices can be disposed

of through your community’s disposal area.

h T

h A

TUNZE

Aquarientechnik GmbH

Seeshaupter Straße 68

82377 Penzberg - Germany

Tel +49 8856 2022

Fax +49 8856 2021

[email protected]

www.tunze.com

Содержание SmartController 7000

























Результаты поиска

Содержание SmartController 7000

Отзывы:

Бренды по названию

Популярные бренды

Tunze SmartController 7000, Инструкция по эксплуатации

Результаты поиска

Содержание SmartController 7000

Отзывы:

Бренды по названию

Популярные бренды