Tunze SmartController 7000 Скачать руководство пользователя страница 10

Страница: 10 / 24

display

back

enter

down

SmartController

7000

h T

h A

Temperature

SmartController

7028.000

(setting using the touch panel)

For this you need:

(1) SmartController 7000
(2) Controlled Power Socket 7070.120

Adjust temperature control:

Press

enter

to get into the menu.

Press on

ward or

down

ward until “Temperature”

appears in the display.

Press on

enter

again → “Temp. control” will appear in the

display.

Press

enter

again, press on

ward or

down

ward and

then

enter

press again to turn the temperature control on

or off again.

With a renewed pressure on

ward “Cooling temp.” to cool

or “Heating temp.” for heating will be selected.

By pressing on

enter

, it is now possible to directly specify

the respective set-point temperature. It can be set with

down

, and stored with

enter

Devices for cooling, e.g. fans or refrigeration units, must be

connected to a switching socket 7070.120 (2) on

channel

(second socket from the left).

Devices for heating must be connected to an (additional)

switching socket 7070.120 (2) on

channel

(second

socket from the right). However, please observe: Do not

exceed the maximum power rating of the switching sockets!

When the SmartController 7000 is connected to a smart phone

or a PC, the history of the temperature of the last 22 hours will

be depicted in a graphic.

Pumps, lights

(setting using the touch panel)

The settings for the Turbelle

pumps and TUNZE

lights can

also be set with the touch panel in a similar manner as the

temperature control. However, we recommend conducting the

settings through a WiFi connection.

Содержание SmartController 7000

























Результаты поиска

Содержание SmartController 7000

Отзывы:

Бренды по названию

Популярные бренды

Tunze SmartController 7000, Инструкция по эксплуатации

Результаты поиска

Содержание SmartController 7000

Отзывы:

Бренды по названию

Популярные бренды