Tunze SmartController 7000 Скачать руководство пользователя страница 20

Страница: 20 / 24

SmartController

7000

h T

h A

Menu “Lamps” —

Lamp 1

Connect the SmartController 7000 to the mains adapter

5012.010 as the power supply, and then connect to the power

grid (1).

Open the SmartController 7000 page in the browser and select

a language (2a).

After clicking on the menu item “Lights” and “Light1” (2b) the

menu “Lamps channel 1” will be displayed (3).

Field “Course of day settings”

(4):

Here, the light curve throughout a day can be set either by

directly dragging the points on the graph (5), or by pressing the

dark blue buttons with the appropriate times below them (6).

Function “Course of the day simulation” (7):

Here, the actuated light (here lamp 1) can simulate the

light curve of an entire day course within about a minute

in fast forward.
Bar “Transfer channel 1 with a ... minutes time delay to

the other channels” (8):

With this function the light curve of the course of a day

can be transferred from Lamp 1 to other light channels

(2 - 4) with a time delay.

This approach should be conducted with preference in

practice, instead of a separate setting for each individual

lamp / each individual light channel!

Any changes to the course of the day for the other

lights/light channels, separate adjustments can still be

performed individually, after the setting of lamp 1 and the

subsequent transfer to the other lights.

Field “Moonlight settings”

(9):

Regulator “Enable moonlight” (9a):

By switching on the “Enable moonlight” function, the

desired moonlight LED (in this case light 1) will be used

as moonlight. The moonlight LED in lamp 1 will assume

its function as the moonlight at the time of the last time

setting for the course of the day setting, and will switch

off during the first time setting for the course of the day.

Regulator “Use of individual moonlight LEDs in the

TUNZE

LED” (9b):

Through this, it is possible to use various LEDs of a lamp

as moonlight. This enables a color adjustment of the

moonlight.

Field “Real-time test”

(10):

The different LEDs of a lamp can be tried out and tested for

performance with this function.

Field “Lightning settings”

(11):

In the “Storm mode” (see chapter “Interval mode - high and

low tide simulation, S. 17) the actuated light can also simulate

lightning flashes, while the pumps are in “Storm mode”.

Содержание SmartController 7000

























Результаты поиска

Содержание SmartController 7000

Отзывы:

Бренды по названию

Популярные бренды

Tunze SmartController 7000, Инструкция по эксплуатации

Результаты поиска

Содержание SmartController 7000

Отзывы:

Бренды по названию

Популярные бренды