pulse only
SmartController
7000
16
H
ig
h T
ec
h A
qu
ar
iu
m
Ec
ol
og
y
Menu “Pumps”
Pulse mode —
wave motion simulation
The pulse operation generates biologically active current flow
pulses (= wave motion). This simulates a natural wave motion
just like in the ocean. The greater the difference between the
specified pump performances, the greater the wave character
of the current flow and the effect on the animals will be.
Up to four pumps can be connected directly to the
SmartController 7000 (1). With Y-adapter cables 7090.300 (2)
an expansion up to 8 pumps will be possible.
Connect the SmartController 7000 to the mains adapter
5012.010 as the power supply, and then connect to the power
grid (3).
Open the SmartController 7000 page in the browser and select
a language (4).
When you click on the menu item “Pumps” (5), the black button
“Pulse mode” (6) will be displayed during the first opening.
Field “General settings”
(7):
With the “Pulse mode” (6) button activated, the time between
minimum and maximum circulation performance of the pumps
(8) can be set here simultaneously for all 4 channels / pumps
with the top regulator. This will generate an efficient wave
motion simulation.
Additionally, it is possible to easily set the time frame of the
feeding break (9) and the ramp for the smooth running of all
pumps (10).
Furthermore, in the pulse mode (6) it is possible to also perform
settings for the “Storm mode” (11), “Night mode” (12) and the
setting of the pumps as “Wave generators” (13), as well as
the separate adjustment of the circulation performance of the
four pumps channels (14) (for this, see the chapter “Interval
mode — high and low tide simulation”, page 17).
